e2fsprogs 1.45.5-2ubuntu1 source package in Ubuntu

Changelog

e2fsprogs (1.45.5-2ubuntu1) focal; urgency=low

  * Merge from Debian unstable.  Remaining changes:
    - Use 4k blocksize in all ext4 mke2fs.conf stanzas, so lvm migration
      between non-4k PVs and 4k PVs works regardless of the volume size.
  * Dropped changes, included upstream:
    - debian/patches/CVE-2019-5188-*.patch:  abort if there is a corrupted
      directory block when rehashing and don't try to rehash a deleted directory
      in e2fsck/rehash.c, e2fsck/pass1b.c.
    - debian/patches/CVE-2019-5094.patch: add checks to prevent
      buffer overrun in quota code in lib/support/quotaio_tree.c,
      lib/support/quotaio_v2.c, lib/support/mkquota.c.

e2fsprogs (1.45.5-2) unstable; urgency=medium

  * Fix com_err support on Hurd, which has POSIX E* error code starting at
    0x40000000.  Otherwise the regression tests will fail since the
    expected output for various error cases will not have the correct
    error text.

e2fsprogs (1.45.5-1) unstable; urgency=medium

  * New upstream feature
  * E2fsck will no longer force a full file system check if time-based
    forced checks are disabled and the last mount time or last write time in
    the superblock are in the future.
  * Fix spurious weekly e-mails when e2scrub_all is run via a cron job
    on non-systemd systems.  (Closes: #944033)
  * Remove an unnecessary sleep in e2scrub which could add up to an
    additional two second delay during the boot up.  Also, avoid
    trying to reap aborted snapshots if it has been disabled via
    e2scrub.conf.  (Closes: #948193)
  * Resize2fs -M's estimates are now more accurate on mounted file systems.
  * Tune2fs prohibits enabling or disabling the uninit_bg feature on
    mounted file systems, since this is unsafe.
  * Fix support of 32-bit uid's and gid's in fuse2fs and in mke2fs -d.
  * Fix mke2fs's setting bad blocks to bigalloc file systems.
  * Fix a bug where fuse2fs would incorrectly report the i_blocks fields for
    bigalloc file systems.
  * Fix potential crash in e2fsck when rebuilding very large directories on
    file systems which have the new large_dir feature enable.
  * Fix FTBFS problem hurd/i386. (Closes: #944649)
  * Fix CVE-2019-5188: potential a out of bounds write in mutate_name()
    when checking a maliciously corrupted file systems
  * Add autopkgtest tests smoke and fuse2fs
  * Updated and clarified various man pages
  * Update the debhelper compatibility level to 12
  * Update the Chinese and Malay translations
  * Update the Debian policy compliance to 4.4.1

e2fsprogs (1.45.4-1) unstable; urgency=medium

  * New upstream feature
  * Fix CVE-2019-5094: A maliciously corrupted file systems can trigger
    buffer overruns in the quota code used by e2fsck.
  * E2fsck will now check to make sure the casefold flag is only set on
    directories, and only when the casefold feature is enabled.
  * E2fsck will not disable the low dtime checks when using a backup
    superblock where the last mount time is zero to fix a failure in
    xfstests ext4/007
  * Fix e2fsck so that when it needs to recreate the root directory, the
    quota counts are correctly updated
  * Update the man pages to document the new fsverity feature, and improve
    the documentation for the casefold and encrypt features
  * Allow e2scrub_all to work when the VG free space is exactly the
    snapshot size (Closes: #935009)
  * Avoid spurious lvm warnings when e2scrub_all is run out of cron on
    non-systemd systems (Closes: #940240)
  * Update the Dutch, German, Malay, Spanish, and Vietnamese translations

 -- Steve Langasek <email address hidden>  Thu, 13 Feb 2020 22:08:18 -0800

Upload details

Uploaded by:
Steve Langasek
Uploaded to:
Focal
Original maintainer:
Ubuntu Developers
Architectures:
any all
Section:
admin
Urgency:
Medium Urgency

See full publishing history Publishing

Series Pocket Published Component Section
Focal release main admin

Downloads

File Size SHA-256 Checksum
e2fsprogs_1.45.5.orig.tar.gz 7.6 MiB 91e72a2f6fee21b89624d8ece5a4b3751a17b28775d32cd048921050b4760ed9
e2fsprogs_1.45.5.orig.tar.gz.asc 488 bytes 0f900698a89e3e1996cd86966e5ae0dc6f8d866e2cd8a0f4285c23e7ea696720
e2fsprogs_1.45.5-2ubuntu1.debian.tar.xz 79.6 KiB bcf259dd0480b50996580a765fded85f89a0a6041f6c81cbbcce94f58944c51b
e2fsprogs_1.45.5-2ubuntu1.dsc 3.3 KiB a4d9f6948bd041523783a727854beff6b8c3786f96f70936e1d63b6cd9596b01

Available diffs

View changes file

Binary packages built by this source

comerr-dev: common error description library - headers and static libraries

 libcom_err is an attempt to present a common error-handling mechanism to
 manipulate the most common form of error code in a fashion that does not
 have the problems identified with mechanisms commonly in use.
 .
 This package contains the development environment for the com_err library.

e2fsck-static: No summary available for e2fsck-static in ubuntu groovy.

No description available for e2fsck-static in ubuntu groovy.

e2fsck-static-dbgsym: debug symbols for e2fsck-static
e2fslibs: transitional package to libext2fs2

 This is a transitional package to libext2fs2. It can safely be removed.

e2fslibs-dev: transitional package to libext2fs-dev

 This is a transitional package to libext2fs-dev. It can safely be removed.

e2fsprogs: No summary available for e2fsprogs in ubuntu groovy.

No description available for e2fsprogs in ubuntu groovy.

e2fsprogs-dbgsym: debug symbols for e2fsprogs
e2fsprogs-l10n: No summary available for e2fsprogs-l10n in ubuntu groovy.

No description available for e2fsprogs-l10n in ubuntu groovy.

e2fsprogs-udeb: stripped-down versions of e2fsprogs, for debian-installer

 This package is an e2fsprogs package built for a reduced size, so that
 it can help to save space in debian-installer.
 .
 Don't attempt to install this package, it has no support for a couple of
 features you surely want. Anyway it should refuse to install.

fuse2fs: ext2 / ext3 / ext4 file system driver for FUSE

 fuse2fs is a FUSE file system client that supports reading and
 writing from devices or image files containing ext2, ext3, and ext4
 file systems.

fuse2fs-dbgsym: debug symbols for fuse2fs
libcom-err2: common error description library

 libcomerr is an attempt to present a common error-handling mechanism to
 manipulate the most common form of error code in a fashion that does not
 have the problems identified with mechanisms commonly in use.

libcom-err2-dbgsym: debug symbols for libcom-err2
libcomerr2: transitional package to libcom-err2

 This is a transitional package to libcom-err2. It can safely be removed.

libext2fs-dev: ext2/ext3/ext4 file system libraries - headers and static libraries

 The ext2, ext3 and ext4 file systems are successors of the original ext
 ("extended") file system. They are the main file system types used for
 hard disks on Debian and other Linux systems.
 .
 This package contains the development environment for the ext2fs and e2p
 libraries.

libext2fs2: ext2/ext3/ext4 file system libraries

 The ext2, ext3 and ext4 file systems are successors of the original ext
 ("extended") file system. They are the main file system types used for
 hard disks on Debian and other Linux systems.
 .
 This package provides the ext2fs and e2p libraries, for userspace software
 that directly accesses extended file systems. Programs that use libext2fs
 include e2fsck, mke2fs, and tune2fs. Programs that use libe2p include
 dumpe2fs, chattr, and lsattr.

libext2fs2-dbgsym: debug symbols for libext2fs2
libss2: command-line interface parsing library

 libss provides a simple command-line interface parser which will
 accept input from the user, parse the command into an argv argument
 vector, and then dispatch it to a handler function.
 .
 It was originally inspired by the Multics SubSystem library.

libss2-dbgsym: No summary available for libss2-dbgsym in ubuntu groovy.

No description available for libss2-dbgsym in ubuntu groovy.

logsave: save the output of a command in a log file

 The logsave program will execute cmd_prog with the specified
 argument(s), and save a copy of its output to logfile. If the
 containing directory for logfile does not exist, logsave will
 accumulate the output in memory until it can be written out. A copy
 of the output will also be written to standard output.

logsave-dbgsym: debug symbols for logsave
ss-dev: command-line interface parsing library - headers and static libraries

 This package includes a tool that parses a command table to generate
 a simple command-line interface parser, the include files needed to
 compile and use it, and the static libs.
 .
 It was originally inspired by the Multics SubSystem library.
 .
 This package contains the development environment for the ss library.