Ubuntu
krb5 package

krb5 1.20.1-1 source package in Ubuntu

Changelog

krb5 (1.20.1-1) unstable; urgency=high

  [ Bastian Germann ]
  * Sync debian/copyright with NOTICE from upstream

  [ Debian Janitor ]
  * Trim trailing whitespace.
  * Strip unusual field spacing from debian/control.
  * Use secure URI in Homepage field.
  * Merge upstream signing key files.
  * Update renamed lintian tag names in lintian overrides.
  * Update standards version to 4.6.1, no changes needed.
  * Remove field Section on binary package krb5-gss-samples that
    duplicates source.
  * Fix field name cases in debian/control (VCS-Browser => Vcs-Browser,
    VCS-Git => Vcs-Git).

  [ Sam Hartman ]
  * New upstream release
    - Integer overflows in PAC parsing; potentially critical for 32-bit
    KDCs or when cross-realm acts maliciously; DOS in other conditions;
    CVE-2022-42898, Closes: #1024267
  * Tighten version dependencies around crypto library, Closes: 1020424
  * krb5-user reccomends rather than Depends on krb5-config.  This avoids
    a hard dependency on bind9-host, but also supports cases where
    krb5-config is externally managed, Closes: #1005821

 -- Sam Hartman <email address hidden>  Thu, 17 Nov 2022 10:34:28 -0700

Upload details

Uploaded by:
Sam Hartman
Uploaded to:
Sid
Original maintainer:
Sam Hartman
Architectures:
any all
Section:
net
Urgency:
Very Urgent

See full publishing history Publishing

Series Pocket Published Component Section

Downloads

File Size SHA-256 Checksum
krb5_1.20.1-1.dsc 3.1 KiB dca082e1aac1ae5f7622b524942a305ad7c93e584f3a67db02f48542eb5b415a
krb5_1.20.1.orig.tar.gz 8.3 MiB 704aed49b19eb5a7178b34b2873620ec299db08752d6a8574f95d41879ab8851
krb5_1.20.1.orig.tar.gz.asc 833 bytes 2afeec5dbc586cc40b7975645e02b4c41c4d719dd02213e828c72d8239d55666
krb5_1.20.1-1.debian.tar.xz 97.1 KiB 19c5f3e66ee1c22f05d86e1ec521e08f885105db4d42403593db6e6db38fad13

Available diffs

No changes file available.

Binary packages built by this source

krb5-admin-server: MIT Kerberos master server (kadmind)

 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service. That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains the Kerberos master server (kadmind), which handles
 account creations and deletions, password changes, and other
 administrative commands via the Kerberos admin protocol. It also
 contains the command used by the master KDC to propagate its database to
 slave KDCs. This package is generally only used on the master KDC for a
 Kerberos realm.

krb5-admin-server-dbgsym: debug symbols for krb5-admin-server
krb5-doc: documentation for MIT Kerberos

 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service. That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains the installation, administrator, and user reference
 manuals for MIT Kerberos and the man pages for the MIT Kerberos
 configuration files.

krb5-gss-samples: MIT Kerberos GSS Sample applications

 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service. That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains bgss-sample and gss-server, programs used to
 test GSS-API mechanisms. These programs are most commonly used in
 testing newly developed GSS-API mechanisms or in testing events
 between Kerberos or GSS implementations.

krb5-gss-samples-dbgsym: debug symbols for krb5-gss-samples
krb5-k5tls: TLS plugin for MIT Kerberos

 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service. That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains a plugin for the TLS functionality used by optional
 functionality in MIT Kerberos. The only current consumer is client support
 for the MS-KKDCP protocol, which tunnels Kerberos protocol traffic through
 an HTTPS proxy.

krb5-k5tls-dbgsym: debug symbols for krb5-k5tls
krb5-kdc: MIT Kerberos key server (KDC)

 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service. That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains the Kerberos key server (KDC). The KDC manages all
 authentication credentials for a Kerberos realm, holds the master keys
 for the realm, and responds to authentication requests. This package
 should be installed on both master and slave KDCs.

krb5-kdc-dbgsym: debug symbols for krb5-kdc
krb5-kdc-ldap: MIT Kerberos key server (KDC) LDAP plugin

 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service. That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains the LDAP plugin for the Kerberos key server (KDC)
 and supporting utilities. This plugin allows the KDC data to be stored
 in an LDAP server rather than the default local database. It should be
 installed on both master and slave KDCs that use LDAP as a storage
 backend.

krb5-kdc-ldap-dbgsym: debug symbols for krb5-kdc-ldap
krb5-kpropd: MIT Kerberos key server (Slave KDC Support)

 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service. That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains the Kerberos slave KDC update server (kpropd). The
 kpropd command runs on the slave KDC server. It listens for update requests
 made by the kprop program, and periodically requests incremental updates from
 the master KDC. This package should be installed on slave KDCs.

krb5-kpropd-dbgsym: debug symbols for krb5-kpropd
krb5-locales: internationalization support for MIT Kerberos

 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service. That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains internationalized messages for MIT Kerberos.

krb5-multidev: development files for MIT Kerberos without Heimdal conflict

 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service. That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 Most users wishing to build applications against MIT Kerberos should
 install libkrb5-dev. However, that package conflicts with heimdal-dev.
 This package installs libraries and headers in /usr/include/mit-krb5 and
 /usr/lib/mit-krb5 and can be installed along side heimdal-multidev, which
 provides the same facilities for Heimdal.

krb5-otp: OTP plugin for MIT Kerberos

 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service. That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains a plugin for the OTP preauthentication method
 (RFC 6560), which allows Kerberos tickets to be obtained using
 One-Time Password authentication. This plugin is for use on the KDC; the
 client support is built in to libkrb5.

krb5-otp-dbgsym: debug symbols for krb5-otp
krb5-pkinit: PKINIT plugin for MIT Kerberos

 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service. That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains a plugin for the PKINIT protocol, which allows
 Kerberos tickets to be obtained using public-key credentials such as
 X.509 certificates or a smart card. This plugin can be used by the
 client libraries and the KDC.

krb5-pkinit-dbgsym: debug symbols for krb5-pkinit
krb5-user: basic programs to authenticate using MIT Kerberos

 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service. That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains the basic programs to authenticate to MIT Kerberos,
 change passwords, and talk to the admin server (to create and delete
 principals, list principals, etc.).

krb5-user-dbgsym: debug symbols for krb5-user
libgssapi-krb5-2: MIT Kerberos runtime libraries - krb5 GSS-API Mechanism

 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service. That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains the runtime library for the MIT Kerberos
 implementation of GSS-API used by applications and Kerberos clients.

libgssrpc4: MIT Kerberos runtime libraries - GSS enabled ONCRPC

 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service. That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains an RPC library used by the Kerberos administrative
 programs and potentially other applications.

libk5crypto3: MIT Kerberos runtime libraries - Crypto Library

 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service. That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains the runtime cryptography libraries used by
 applications and Kerberos clients.

libkadm5clnt-mit12: MIT Kerberos runtime libraries - Administration Clients

 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service. That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains the runtime library used by clients of the Kerberos
 administration protocol.

libkadm5srv-mit12: MIT Kerberos runtime libraries - KDC and Admin Server

 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service. That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains the runtime library used by Kerberos administrative
 servers.

libkdb5-10: MIT Kerberos runtime libraries - Kerberos database

 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service. That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains the internal Kerberos database libraries.

libkrad-dev: MIT Kerberos RADIUS Library Development

 This package includes development headers for libkrad0, the MIT
 Kerberos RADIUS library. You should not use this RADIUS library in
 packages unrelated to MIT Kerberos.

libkrad0: MIT Kerberos runtime libraries - RADIUS library

 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service. That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains the internal support library for RADIUS functionality.

libkrb5-3: MIT Kerberos runtime libraries

 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service. That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains the runtime library for the main Kerberos v5 API
 used by applications and Kerberos clients.

libkrb5-dbg: debugging files for MIT Kerberos

 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service. That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains the debugging information for the MIT Kerberos
 libraries. Install this package if you need to trace problems inside the
 MIT Kerberos libraries with a debugger.

libkrb5-dev: headers and development libraries for MIT Kerberos

 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service. That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains the symlinks, headers, and development libraries
 needed to compile and link programs that use the Kerberos libraries.

libkrb5support0: MIT Kerberos runtime libraries - Support library

 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service. That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains an internal runtime support library used by other
 Kerberos libraries.