linux-fsl-imx51 2.6.31-101.8 source package in Ubuntu

Changelog

linux-fsl-imx51 (2.6.31-101.8) karmic; urgency=low

  [ Alan Tull ]

  * ARM: IMX51: ENGR00114681 pcm: set minimum period to 2k
  * ARM: IMX51: ENGR00114820-1 Revert SGTL5000: Enable amixer controls
    Jack/Speaker Function
  * ARM: IMX51: ENGR00114820-2 sgtl5000: pop fixes
  * ARM: IMX51: ENGR00114867 MX51: tristate i2c levelshifter
  * ARM: IMX51: ENGR00115688 dvi: disable edid read
  * ARM: IMX51: ENGR00115618-1 sgtl5000: power reduction pop fix
  * ARM: IMX51: ENGR00115618-2 sgtl5000: power savings
  * ARM: IMX51: ENGR00115754 sgtl5000: power mic bias earlier

  [ Amit Kucheria ]

  * [Config] Run updateconfigs after rebasing to 2.6.31-rc8
  * ARM: IMX51: Make sgt5000 driver compile
  * [Upstream] Remove X86 dependency for the rt3070 driver
    - LP: #423767
  * [Config] Enable rt3070 from staging for imx51
    - LP: #423767
  * [Config] Set CONFIG_LSM_MMAP_MIN_ADDR to 0
  * [Config] imx51: Enable APM_EMULATION as per imx51_defconfig
  * ARM: IMX51: Fix compile of mxc_dataflash.c by replacing bus_id
  * ARM: IMX51: Don't let the dataflash driver hitch a ride on CONFIG_MTD
  * [Config] imx51: disable MTD_MXC_DATAFLASH
  * [Config] Run updateconfigs after rebasing to 2.6.31 final
  * [Config] imx51: updateconfigs after applying sdk-1.6 patches
  * ARM: IMX51: Remove cpu_is_mx2/cpu_is_mx3 definition from hardware.h
  * ARM: IMX51: Paramters to module_param_call should be NULL

  [ Ann Thornton ]

  * ARM: IMX51: ENGR00113055-1 Add ability to read and user EDID info
  * ARM: IMX51: ENGR00113055-2 Added ability to read EDID data and use it
    to set monitor.
  * ARM: IMX51: ENGR00114026 MX51 Prevent 2nd initialization of
    framebuffer.
  * ARM: IMX51: ENGR00114023-1 Support for dual monitors.
  * ARM: IMX51: ENGR00114023-2 MX51: Add support for dual monitors.
  * ARM: IMX51: ENGR00114024 Enable 720p via HDMI

  [ Arik Gubeskys ]

  * ARM: IMX51: ENGR00114210 IPU IC bypass mode: move display configuration
    to the FB driver

  [ b00984 ]

  * ARM: IMX51: ENGR00113773 Add apm support for mc13892 battery
  * ARM: IMX51: ENGR00114655 mitsubishi lvds xga lcd support for babbage
    2.5

  [ Dinh Nguyen ]

  * ARM: IMX51: ENGR00114282 MX51: Disable L2 SRPG
  * ARM: IMX51: ENGR00114453 MX51: Add support for keypad on Babbage 2.5
    board

  [ Guoqing Jiang ]

  * ARM: IMX51: ENGR00113618 Audio: Workaround for sgtl5000 codec suspend
    failure issue on MX25

  [ Jason ]

  * ARM: IMX51: ENGR00114157-1 Add SPI data flash driver support
  * ARM: IMX51: ENGR00114157-2 Add SPI data flash support for MX51
    babbage2.5
  * ARM: IMX51: ENGR00114189 Enlarge the rootfs partition to accommodate
    Gnome-mobile
  * ARM: IMX51: ENGR00113990 Fix for mtd_oobtest test failure
  * ARM: IMX51: ENGR00114882 Reset NFC delay line register
  * ARM: IMX51: ENGR00114880 Data abort on NFC memory byte access
  * ARM: IMX51: ENGR00115329 Enable NFC symmetric mode on MX51
  * ARM: IMX51: ENGR00115330 Fix ECC mode setting for MX51TO3
  * ARM: IMX51: ENGR00115336 Fix setting NFC FW for 16bit nand flash
    support on MX51

  [ JasonHua ]

  * ARM: IMX51: ENGR00113106 MX25 Camera: Some kernel message dumped when
    remove ov2640_camera

  [ Katherine Lu ]

  * ARM: IMX51: ENGR00114097 MX51 Babbage: Register backlight device only
    display card attached
  * ARM: IMX51: ENGR00113546 MX51: set PLL2 as UART parent clk
  * ARM: IMX51: ENGR00114139 MX51 Babbage: remove MC13892 backlight device
  * ARM: IMX51: ENGR00114166 MX51 Babbage: can not reboot from SPI NOR
  * ARM: IMX51: ENGR00114037 MX31: LCD can not resume after entering
    standby
  * ARM: IMX51: ENGR00114881 MX51: Disable SAHARA by default
  * ARM: IMX51: ENGR00114803 eCSPI Hang when acessing from multi modules

  [ Lily Zhang ]

  * ARM: IMX51: ENGR00113197-1 Fix Write pending issue with hwclock
    function
  * ARM: IMX51: ENGR00113197-2 disable RTC clock when it's not active
  * ARM: IMX51: ENGR00110228 Fix GPT timer stop issue
  * ARM: IMX51: ENGR00113662 enable coin cell charger
  * ARM: IMX51: ENGR00114328-1 SRTC: Change wait time for write operations
  * ARM: IMX51: ENGR00114328-2 BBG: Keep VRTC and CKIL active for SRTC
  * ARM: IMX51: ENGR00114345 Set MC13892 irq as wakeup resource
  * ARM: IMX51: ENGR00114738 MX51 BBG: Add OneWire support

  [ Lionel.Xu ]

  * ARM: IMX51: ENGR00107200 MX25: The SW workaround for left/right channel
    random swap issue
  * ARM: IMX51: ENGR00113470 MX37 ALSA ADC: Resolve the issue that arecord
    can't work
  * ARM: IMX51: ENGR00115113 SGTL5000: Jack Function/Speaker Function

  [ Liu Ying ]

  * ARM: IMX51: ENGR00113541 IPUv3:Support IC combing with local alpha
    contained in pixel
  * ARM: IMX51: ENGR00113673 IPUv3:Fix RGB to RGB pixel format changing
    with IC PRP_VF
  * ARM: IMX51: ENGR00114324-1 Enhance mmap implement of IIM driver
  * ARM: IMX51: ENGR00114611 Support RGB565 pixel format for WVGA panel on
    BBG2.5
  * ARM: IMX51: ENGR00114617 Support OV3640 camera on BBG2.5 accessory
    board
  * ARM: IMX51: ENGR00114663-1 Add function comments for mmap function of
    IIM driver

  [ Nancy Chen ]

  * ARM: IMX51: ENGR00114374 USB: Failed to unload USB host module
  * ARM: IMX51: ENGR00114685 MX51: Change the GP voltages for 167MHz and
    800MHz
  * ARM: IMX51: ENGR00114689 CPUFREQ: Add conservative governor support
  * ARM: IMX51: ENGR00114686 DVFS-CORE: Use GPC STRT bit to control DVFS
  * ARM: IMX51: ENGR00114686-1 MX51: Enable other CPUFREQ governors
  * ARM: IMX51: ENGR00114736 Fix build break by adding mxc_dvfs.h
  * ARM: IMX51: ENGR00114871 MX51: Add command line to enable peripheral SW
    Freq scaling
  * ARM: IMX51: ENGR00114963 MX51: CPUFREQ is not trigged if DVFS CORE is
    enabled
  * ARM: IMX51: ENGR00115013 MX51: System doesn't enter APM mode if DVFS
    CORE enabled

  [ Patrick Turley ]

  * ARM: IMX51: ENGR00107929 /proc/cpu/clocks Corrupts memory
  * ARM: IMX51: ENGR00103310 Initial imx_nfc NAND Flash MTD driver
  * ARM: IMX51: ENGR00115700: mxc_nd2 driver panics the kernel when booting
    on i.MX25

  [ Raj Rajasekaran ]

  * ARM: IMX51: ENGR00107366 DryIce: DryIce unit test failed with RTC
    enabled.

  [ Ranjani Vaidyanathan-RA5478 ]

  * ARM: IMX51: ENGR00114937: MX51: Move USBOH3 and USB-PHY to source from
    PLL2 and 24MHz.
  * ARM: IMX51: ENGR00115321: MX51: Change STOP mode voltage based on DS0.3
    datasheet.
  * ARM: IMX51: ENGR00115334: MX51: Donot scale arm_axi_clk in peripheral
    bus scaling.

  [ Richard Zhu ]

  * ARM: IMX51: ENGR00113376 [MX37] SD can't detected after fast
    removal/insertion
  * ARM: IMX51: ENGR00113607 Refine and unify the definitions of the two
    mmc host
  * ARM: IMX51: ENGR00114325-1: SIM: Add MX25 support

  [ Rob Herring ]

  * ARM: IMX51: ENGR00114598 mx51: add missing fb memory resource setup
  * ARM: IMX51: ENGR00114599 mx51: Add gpu2d uio driver
  * ARM: IMX51: ENGR00115613 ipuv3: enable DMFC watermark for sync channels

  [ Robby Cai ]

  * ARM: IMX51: ENGR00114911 make video buffer cacheable to improve video
    performance

  [ Tim Gardner ]

  * [Config] Don't include ABI or version in vmlinuz name in kernel-image
    - LP: #359049

  [ Wallace Wang ]

  * ARM: IMX51: ENGR00114140 SSI: TX fail if RX is enabled before TX
  * ARM: IMX51: ENGR00114625 BABBAGE: Add spdif support
  * ARM: IMX51: ENGR00114851 MX51: Fix SSI1 SDMA data transfer failure

  [ William Lai ]

  * ARM: IMX51: ENGR00114609 MX35 ASRC: Support SPDIF in/out
  * ARM: IMX51: ENGR00114644-1 MX51 PWM: Add pwm and backlight devices
  * ARM: IMX51: ENGR00114644-2 MX51 PWM: Correction for the PWM

  [ Wu Guoxing ]

  * ARM: IMX51: ENGR00114622 GPU: add platform device
  * ARM: IMX51: ENGR00114692 GPU: use axi_a_clk for both 2d and 3d
  * ARM: IMX51: ENGR00114962 : change gpu UIO driver to module

  [ Xinyu Chen ]

  * ARM: IMX51: ENGR00114989 MX35 SPDIF driver failed to play 48KHz audio

  [ Zhou Jingyu ]

  * ARM: IMX51: ENGR00114145 disable pmic charger on Babbage
  * ARM: IMX51: ENGR00113543 fix bug in mc13892 ADC suspend

  [ Ubuntu: 2.6.31-10.34 ]

  * [Upstream] ext3: Don't update superblock write time when filesystem is
    read-only
    - LP: #427622

  [ Ubuntu: 2.6.31-10.33 ]

  * [Upstream] dvb-usb: fix tuning with Cinergy T2
    - LP: #421258
  * [Config] Unconditionally copy files from sub-flavours lists.
    (really, really fix it this time)
    - LP: #423426
  * [Config] Set CONFIG_CACHEFILES=m for all flavours
  * ext4: Don't update superblock write time when filesystem is read-only
    - LP: #427822

  [ Ubuntu: 2.6.31-10.32 ]

  * [Config] enable module support for memory stick
    - LP: #159951
  * [Config] Unconditionally copy files from sub-flavours lists.
    - LP: #423426

  [ Ubuntu: 2.6.31-10.31 ]

  * rebase to v2.6.31 final
  * [Config] Recommend grub-pc in linux-image
    - LP: #385741
  * [Upstream] Pull latest update of lenovo-sl-laptop
  * [Upstream] (drop after 2.6.31) acerhdf: fix fan control for AOA150
    model
    - LP: #426691
  * [Config] De-macro some package names.
  * rebase to 2.6.31 final.

  [ Ubuntu: 2.6.31-10.30 ]

  * [Config] Enable CONFIG_USB_DEVICEFS
    - LP: #417748
  * [Config] Populate the config-update template a bit more
  * rebase to v2.6.31-rc9
  * [Config] update configs following rebase to v2.6.31-rc9
  * [Config] update ports configs following rebase to v2.6.31-rc9
  * SAUCE: wireless: hostap, fix oops due to early probing interrupt
    - LP: #254837
  * [Upstream] ACPI: Add Thinkpad T400 & Thinkpad T500 to OSI(Linux)
    white-list
    - LP: #281732
  * [Upstream] ACPI: Add Thinkpad X200, X200s, X200t to OSI(Linux)
    white-list
    - LP: #281732
  * [Upstream] ACPI: Add Thinkpad X300 & Thinkpad X301 to OSI(Linux)
    white-list
    - LP: #281732
  * [Upstream] ACPI: Add Thinkpad R400 & Thinkpad R500 to OSI(Linux)
    white-list
    - LP: #281732
  * [Upstream] ACPI: Add Thinkpad W500, W700, & W700ds to OSI(Linux)
    white-list
    - LP: #281732
  * SAUCE: AppArmor: Fix profile attachment for regexp based profile names
    - LP: #419308
  * SAUCE: AppArmor: Return the correct error codes on profile
    addition/removal
    - LP: #408473
  * SAUCE: AppArmor: Fix OOPS in profile listing, and display full list
    - LP: #408454
  * SAUCE: AppArmor: Fix mapping of pux to new internal permission format
    - LP: #419222
  * SAUCE: AppArmor: Fix change_profile failure
    - LP: #401931
  * SAUCE: AppArmor: Tell git to ignore generated include files
    - LP: #419505
  * [Upstream] acpi: video: Loosen strictness of video bus detection code
    - LP: #333386
  * SAUCE: Remove ov511 driver from ubuntu subdirectory
  * [Config] Exclude char-modules from non-x86 udeb creation
  * SAUCE: Notify the ACPI call chain of AC events
  * [Config] CONFIG_SATA_VIA=m
    - LP: #403385
  * [Config] Build in all phylib support modules.
  * [Config] Don't fail when sub-flavour files are missing
    - LP: #423426
  * [Config] Set CONFIG_LSM_MMAP_MIN_ADDR=0
    - LP: #423513
  * Rebased against v2.6.31-rc9

  [ Ubuntu: 2.6.31-9.29 ]

  * [Upstream] agp/intel: support for new chip variant of IGDNG mobile
    - LP: #419993
  * [Config] d-i/modules: Add new char-modules file, initialize with
    intel-agp
    - LP: #420605
  * Rebased against 2.6.31-rc8 plus some inotify regression patches:
    up through git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
    adda766193ea1cf3137484a9521972d080d0b7af.

  [ Ubuntu: 2.6.31-8.28 ]

  * [Config] Let nic-shared-modules depends on crypto-modules
    - LP: #360966
  * [Upstream] (drop after 2.6.31) drm/i915: increase default latency
    constant
    - LP: #412492
  * [Upstream]: (drop after 2.6.31) dell-laptop: don't change softblock
    status if HW switch is disabled
    - LP: #418721
  * [Upstream]: (drop after 2.6.31) compal-laptop: Add support for known
    Compal made Dell laptops
  * [Upstream]: (drop after 2.6.31) compal-laptop: Replace sysfs support
    with rfkill support
  * [Config] Add acpiphp to virtual sub-flavour
    - LP: #364916
  * Drop KSM patch set for now because of instabilities with encrypted swap.
    - LP: #418781

  [ Ubuntu: 2.6.31-7.27 ]

  * [Config] updateconfigs updateportsconfigs after 2.6.31-rc7 rebase
  * SAUCE: (drop after 2.6.31) Added KSM from mmotm-2009-08-20-19-18
    Replaces previous ksm patches from 2.6.31-6.25
  * [Config] KSM=y

  [ Ubuntu: 2.6.31-6.26 ]

  * [Config] enable CONFIG_AUFS_BR_RAMFS
    - LP: #414738
  * split out debian directory ready for abstraction
  * add printdebian target to find branch target
  * abstracted debian -- debian/files is not abstracted
  * abstracted debian -- packages must be built in debian/<pkg>
  * abstracted debian -- kernel-wedge needs to work in debian/
  * abstracted debian -- ensure we install the copyright file
  * abstracted-debian -- drop the debian directories from headers
  * abstracted-debian -- drop the debian directories from headers part 2
  * SAUCE: ubuntu-insert-changes -- follow abstracted debian
  * [Upstream] aoe: ensure we initialise the request_queue correctly V2
    - LP: #410198
  * [Config] Ports: Disable CONFIG_CPU_FREQ_DEBUG on powerpc-smp
  * [Config] Ports: Re-enable windfarm modules on powerpc64-smp
    - LP: #413150
  * [Config] Ports: Build all cpu frequency scaling governors into ports
    kernels
  * [Config] Ports: Build ext2 and ext3 modules into ports kernels
  * [Config] Ports: CONFIG_PACKET=y for all ports kernels
  * [Config] Ports: Enable PS3 network driver
  * abstracted debian -- call $(DEBIAN)/rules using make
  * [Config] Abstract the debian directory
  * SAUCE: Improve error reporting in postinst
    - LP: #358564

 -- Andy Whitcroft <email address hidden>   Fri, 18 Sep 2009 13:10:41 +0100