squid3 3.5.12-1ubuntu2 source package in Ubuntu

Changelog

squid3 (3.5.12-1ubuntu2) xenial; urgency=medium

  * debian/squid.postinst: Fix dist-upgrade of squid by detecting service
    name (/etc/init.d/squid vs. squid3).

squid3 (3.5.12-1ubuntu1) xenial; urgency=medium

  * Merge from Debian (LP: #1473691). Remaining changes:
    - Add dep8 tests.
    - Use snakeoil certificates.
    - Run sarg-reports if present before rotating logs
    - debian/patches/90-cf.data.ubuntu.dpatch: add an example refresh
      pattern for debs.
    - Add disabled by default AppArmor profile. Versioned dependency on
      init-system-helpers (>> 1.22ubuntu5) to ensure we have the
      apparmor-profile-load script at boot time.
  * Drop changes:
    - No longer needed:
      + Upstart job.
      + Dependency package for squid -> squid3: depcrecated; the transitional package now runs the other way.
      + Fix perl & pod2man config.tests.
      + fix-logical-not-parentheses-warning.patch.
      + fix-pod2name-pipe-failure.patch.
      + --disable-strict-error-checking to fix FTBFS.
    - NEWS.Debian: no longer relevant.
    - Hardening options: deprecated.
    - Add patch to show distribution: fixed in Debian (but see
      lsb-release B-D).
    - Enable parallel build: makes no difference to build time.
    - Force -O2 to work around build failure with -O3: presumed no
      longer needed.
    - Fixed upstream:
      + CVE-2014-3609.patch: confirmed fixed since 3.4.7 from upstream
        advisory.
      + Fix various ICMP handling issues in Squid pinger: confirmed
        fixed since 3.4.7 from upstream advisory.
      + fix-caching-vary-header.patch.
      + netfilter_fix.patch.
  * Drop Testsuite: header from dep8 tests: no longer required since
    dpkg-source >= 1.17.11 does it.
  * Revert "Set pidfile for systemd's sysv-generator" from Debian.
    systemd races the squid daemon for pidfile creation, causing systemd
    to consider the service start to have failed. Work around for now by
    not telling systemd to use the pidfile.
  * Add lsb-release build dep. This is required for the
    --enable-build-info line in debian/rules to work correctly.
  * Correctly rename conffiles migrated by Debian from squid3 to squid.
  * Remove conffile for old upstart job Ubuntu delta.
  * Rename Apparmor profile conffile.
  * Drop old transitional Apparmor code no longer required.
  * Adjust AppArmor profile for squid3->squid rename.
  * Drop versioned AppArmor dependency (transitional; no longer
    required).

squid3 (3.5.12-1) unstable; urgency=medium

  [ Amos Jeffries <email address hidden> ]
  * New Upstream Release

  * debian/squid.postinst
    - remove unneeded config edits for manager ACL (Closes: #801564)

  * debian/patches/
    - add upstream patch to cleanup FATAL log messages

  [ Mathieu Parent ]
  * Fix FATAL parsing before start/reload/restart (Closes: #800341)
  * Set pidfile for systemd's sysv-generator (Closes: #800341)

squid3 (3.5.10-1) unstable; urgency=high

  [ Amos Jeffries <email address hidden> ]
  * New Upstream Release (Closes: #799923, #800876)

  * debian/squid.rc
    - Grok pid_filename from squid.conf (Closes: #520736)
    - Update SELinux context when creating directories (Closes: #798827)

  [ Luigi Gangitano <email address hidden> ]
    - Urgency high due to regression fix for CVE-2015-5400.

squid3 (3.5.7-1) unstable; urgency=medium

  [ Amos Jeffries <email address hidden> ]
  * New upstream release (Closes: #789602, #793400, #253777)

  * debian/rules
    - Add BUILDCXXFLAGS to use hardening flags during build

  * debian/squid.links
    - Add symlink for squid3.8 man(8) page to resolve lintian issue

  * debian/squid.postinst
    - Remove unnecessary 'squid -z' (Closes: #794639)

  [ Luigi Gangitano <email address hidden> ]
  * Rebuild using GCC-5 (Closes: #794536)

  * debian/squid.postinst
    - Check for squid3 initscript before we try to execute it

  * debian/squid.rc
    - Set working directory to /var/run/squid

squid3 (3.5.6-1) unstable; urgency=medium

  [ Amos Jeffries <email address hidden> ]
  * New upstream release (Closes: #760303)
    - Fixed upstream macro issue that fail to pass reproducible builds test
    - Fixes CVE-2015-5400: Improper Protection of Alternate Path
      (Closes: #793128)

  * Removed deprecated MSNT and MSNT-multi-domain authentication helpers

  * Transition squid3 to squid
    - Renamed squid3 package to squid (Closes: #521053, #565555, #672156)
      (Closes: #294431, #569575, #714334, #279840, #576423, #779127)
    - Renamed squid3-common package to squid-common
    - Renamed squid3-dbg package to squid-dbg
    - Add dummy transitional package squid3

  * debian/patches/
    - Removed patches included upstream and refresh others

  * debian/squid3-cgi.dirs
    - Removed old unused packaging file

  * debian/control
    - Add dependency on libgnutls28-dev for squidclient HTTPS support

  [ Luigi Gangitano <email address hidden> ]
  * debian/control
    - Changed dependency on libecap3-dev (Closes: #789774)
    - Made squid-common conflict and replace squid3-common
    - Fixed dependencies and sections of transitional packages

  * {NEWS,README}.Debian
    - Added information on package name migration

squid3 (3.4.8-6) unstable; urgency=medium

  [ Luigi Gangitano <email address hidden> ]
  * debian/patches/31-squid-3.4-13199.patch
    - Added upstream patch fixing excessive CPU usage (Closes: #776461)

  * debian/patches/32-squid-3.4-13210.patch
    - Added upstream patch fixing excessive CPU and memory usage in
      NTLM and Negotiate authentication helpers (Closes: #776463)

  * debian/patches/33-squid-3.4-13211.patch
    - Added upstream patch fixing a possible replay vulnerability on Digest
      authentication (Closes: #776464)

  * debian/patches/34-squid-3.4-13213.patch
    - Added upstream patch fixing incorrect security permissions for
      TOS/DiffServ packet marking (Closes: #776468)

  * debian/patches/35-squid-3.4-13203.patch
    - Added upstream patch fixing squidclient unable to connect to host with
      both IPv4 and IPv6 addresses (Closes: #742425)

squid3 (3.4.8-5) unstable; urgency=medium

  [ Luigi Gangitano <email address hidden> ]
  * debian/squid3.{pre,post}inst
    - Moved ACL manager fix to postinst (Closes: #773032)

squid3 (3.4.8-4) unstable; urgency=medium

  [ Luigi Gangitano <email address hidden> ]
  * debian/squid3.preinst
    - Revert changes on abort-upgrade

squid3 (3.4.8-3) unstable; urgency=medium

  [ Amos Jeffries <email address hidden> ]
  * debian/squid3.preinst
    - Remove obsolete manager ACL definition from squid.conf
      when upgrading squid3 package (Closes: #768170)


  [ Luigi Gangitano <email address hidden> ]
  * debian/squid3.preinst
    - Fix configuration file only if needed and match any uncommented line

squid3 (3.4.8-2) unstable; urgency=medium

  [ Santiago Garcia Mantinan <email address hidden> ]
  * Add patch to remove bashisms from cert_tool
  * Add manual page for squid-purge
  * Create run_dir needed for SMP with several workers to run. This
    fixes #710126 (Closes: #732183, #760400)
  * Use CONFIG instead of sq (Closes: #763867)
  * Remove find_cache_type and use grepconf (both functions were =).
  * Allow find_cache_dir and grepconf to have whitespace in the beginning
    (Closes: #761209)
  * Add config check before reload/restart, thanks Freddy (Closes: #728222)

  [ Amos Jeffries <email address hidden> ]
  * debian/squid3.postinst
    - update grepconf to support SMP macros and sub-config files
      when locating cache_dir and effective user/group

  * debian/squid3.rc
    - remove special handling for obsolete COSS cache type
    - change grepconf to support SMP macros and sub-config files

  * debian/rules
    - add distribution details to squid -v display output
      this obsoletes the Ubuntu fix-distribution.patch

  * debian/control
    - bumped libecap dependency version to 0.2.0-2

  * debian/squid3.resolvconf
    - added check on /usr availability before squid3 restart (Closes: #765476)

  [ Luigi Gangitano <email address hidden> ]
  * debian/squid3.rc
    - Change config check to config parse on start/reload/restart

  * debian/control
    - Fixed XS-Vcs-Git Header pointing anonscm.debian.org

squid3 (3.4.8-1) unstable; urgency=high

  * Urgency high due to security fixes

  [ Amos Jeffries <email address hidden> ]
  * New upstream release (Closes: #737008)
    - Fixes CVE-2014-6270: off by one in snmp subsystem (Closes: #761002)
    - Fixes CVE-2014-CVE-2014-7141 and CVE-214-7142 (Closes: #760999)
      + pinger remote DoS vulnerabilities
    - Fixes CVE-2014-0128: Denial of Service in SSL-Bump (Closes: #741312)

  * debian/patches/
    - remove CVE-2014-3609.patch included upstream
    - remove 17-pod2man-check.patch obsoleted by new version
    - add upstream patch 21-squid-3.4-13176-memoryleak.patch:
      memory leak in external_acl_type helper with cache=0 or ttl=0

  * debian/rules
    - add --disable-arch-native to build with portable CPU support

  * debian/control
    - libecap API support is specific to version 0.2.0
    - use nettle for crypto library

  * debian/watch
    - updated watch pattern for upstream major series

  * debian/rules
    - Remove obsolete --enable-underscores (Closes: #693905)

  [ Luigi Gangitano <email address hidden> ]
  * debian/patches/
    - refreshed all patches to match 3.4.8

  * debian/control
    - Added dependency for missing intepreter ksh
    - Bumped Standard-Version to 3.9.6, no change needed
    - Added XS-Vcs-Git Header pointing to Alioth repository

squid3 (3.3.8-1.2) unstable; urgency=high

  * Non-maintainer upload by the Security Team.
  * Add CVE-2014-3609.patch patch.
    CVE-2014-3609: Denial of Service in Range header processing.
    Ignore Range headers with unidentifiable byte-range values. If squid is
    unable to determine the byte value for ranges, treat the header as
    invalid. (Closes: #759509)

squid3 (3.3.8-1.1) unstable; urgency=low

  * Non-maintainer upload.
  * Fix "FTBFS: cp: cannot stat
    '/«PKGBUILDDIR»/debian/tmp/usr/share/man/man8/basic_db_auth.8': No
    such file or directory":
    new patch 17-pod2man-check.patch:
    fix config.test files' check for perl and pod2man
    (Closes: #725599)

 -- Ryan Harper <email address hidden>  Mon, 28 Mar 2016 11:20:35 -0500