wacom-tools 1:0.8.1.6-1ubuntu1 source package in Ubuntu

Changelog

wacom-tools (1:0.8.1.6-1ubuntu1) jaunty; urgency=low

  * Merge from debian unstable, remaining changes:
    - Bump the epoch because of old Ubuntu packaging.
    - debian/control:
      Change the Maintainer address.
      Bump the epoch on Replaces/Conflicts.
      Don't build wacom-kernel-source anymore (#71944).
    - debian/wacom.postinst:
      Remove old files.
    - debian/xserver-xorg-input-wacom.init.d, debian/rules:
      Initscript for serial devices.
    - debian/rules: Disable the scaling quirk.
    - Enable input-hotplug: install 10-wacom.fdi in
      /usr/share/hal/fdi/policy/20thirdparty.
    - Include wacomcpl so the stylus can be calibrated. (LP: #216347)
      - debian/rules: --enable-libwacomxi
      - debian/control: Add tcl-dev, tk-dev to Build-Depends, and tcl,
        tk to wacom-tools Depends.
  * Applied xserver-1.6.patch, so it builds against the new xserver.

wacom-tools (0.8.1.6-1) unstable; urgency=low

  * Updated udev rules, factored out many common tests and added support
    for tabletpc devices with multiple interfaces.
  * Updated sv.po, thanks again to Martin Bagge.   Closes: #503354

wacom-tools (0.8.1.4-1) experimental; urgency=low

  * Experimental upload for testing with xorg 1.5  Closes: #493976
  * Update sv.po, thanks to Martin Bagge.          Closes: #483769

wacom-tools (1:0.8.1.4-0ubuntu3) intrepid; urgency=low

  * debian/rules: Enable the fdi file again. (LP: #282203)

wacom-tools (1:0.8.1.4-0ubuntu2) intrepid; urgency=low

  * debian/rules: Don't use the fdi file, since with input-hotplug it's not
    possible to fully utilize the device, and properly configuring it is
    more awkward. Install it in /usr/share/doc/xserver-xorg-input-wacom
    instead so people can use it if they want.
  * Include wacomcpl so the stylus can be calibrated. (LP: #216347)
    - debian/rules: --enable-libwacomxi
    - debian/control: Add tcl-dev, tk-dev to Build-Depends, and tcl, tk to
      wacom-tools Depends.

wacom-tools (1:0.8.1.4-0ubuntu1) intrepid; urgency=low

  [ Timo Aaltonen ]
  * New upstream release.
  * src/xdrv/wcmConfig.c: s/WCM_UNINIT_CALLED/WCM_XORG_XSERVER_1_4/
    (LP: #259035)

  [ Mario Limonciello ]
  * Modify 10-wacom.fdi to include current representation
    of N-Trig digitizer. (LP: #272289)

wacom-tools (1:0.8.1.3-0ubuntu2) intrepid; urgency=low

  * debian/rules: install the fdi file again..

wacom-tools (1:0.8.1.3-0ubuntu1) intrepid; urgency=low

  * New upstream release.
  * 10-wacom.fdi:
    - Check for WALTOP devices (like Aiptek 10000U).
    - Set Type = stylus.

wacom-tools (1:0.8.0.2-2ubuntu3) intrepid; urgency=low

  * Enable input-hotplug: install 10-wacom.fdi in
    /usr/share/hal/fdi/policy/20thirdparty.

wacom-tools (1:0.8.0.2-2ubuntu2) intrepid; urgency=low

  * Rebuild against the new xserver-xorg-dev.

wacom-tools (1:0.8.0.2-2ubuntu1) intrepid; urgency=low

  * Merge with Debian unstable, remaining changes:
    - Bump the epoch because of old Ubuntu packaging.
    - debian/control:
      Change the Maintainer address.
      Bump the epoch on Replaces/Conflicts.
      Don't build wacom-kernel-source anymore (#71944).
    - debian/wacom.postinst:
      Remove old files.
    - debian/xserver-xorg-input-wacom.init.d, debian/rules:
      Initscript for serial devices.
    - debian/rules: Disable the scaling quirk.

wacom-tools (0.8.0.2-2) unstable; urgency=low

  * Fix a regression to the dlloader test (again).  Closes: #481720

wacom-tools (0.8.0.2-1) unstable; urgency=low

  * Fixes a crash with XServer 1.4  Closes: #454568
  * Be explicit about using bash.   Closes: #459166
  * Update nl.po, thanks to Vincent Zweije and debian-l10n-dutch.
    Closes: #464448
  * Split lintian-overrides into two files because lintian barfs if the
    entries for different packages are all kept together.  *unf*
  * Bump the debhelper minimum version to 6.0.7 for dh_lintian, and
    bump compat to 6 if we are going to be forced to depend on it anyhow.

wacom-tools (1:0.7.9.8-0ubuntu3) hardy; urgency=low

  * Another fix for the braindead configure{,.in}. Removed a test
    figuring out if $WCM_MODDIR had evdev/kbd/mouse in it, and if not
    change the dlloader configure option we used back to 'no'. How sane.
    (LP: #208909)

wacom-tools (1:0.7.9.8-0ubuntu2) hardy; urgency=low

  * Fix the broken configure{,.in} by adding 'test' to the module path
    check. (LP: #208909)

wacom-tools (1:0.7.9.8-0ubuntu1) hardy; urgency=low

  [ Tom Jaeger ]
  * New upstream release (LP: 195953)
  * debian/rules: disable the scaling quirk.
  * linuxwacom/src/xdrv/Makefile.{am,in}:
    - add DEFAULT_INCLUDES to fix the build because we use a builddir.
    - fix the source patch of .depend target.

wacom-tools (1:0.7.9.3-2ubuntu2) hardy; urgency=low

  * Add an epoch to the Conflicts/Replaces (LP: #180214).

wacom-tools (1:0.7.9.3-2ubuntu1) hardy; urgency=low

  * Merge with Debian unstable (LP: #134879, #136977, #174382, #175050).
    Remaining changes:
    - Bump the epoch because of old Ubuntu packaging.
    - debian/control:
      Change the Maintainer address.
    - debian/wacom.postinst:
      Remove old files.
    - debian/xserver-xorg-input-wacom.init.d, debian/rules:
      Initscript for serial devices.
  * Fix initscript to work with SysFS in 2.6.24. (LP: #177878)
  * debian/control: don't build wacom-kernel-source anymore. (LP: #71944)

wacom-tools (0.7.9.3-2) unstable; urgency=low

  * Make xserver-xorg-input-wacom conflict/replace the earlier wacom-tools
    packages because the wacom.4 manpage has switched packages.
  * Generate a xserver-xorg-input-wacom.substvars file to manage the XOrg
    version provides and dependencies.

wacom-tools (0.7.9.3-1) unstable; urgency=low

  * New upstream release, includes support for XOrg 7.3/1.4
    Closes: #442424, #443032
  * Don't overrun padkey_codes[] when iterating through it.  Closes: #447681
  * Move the wacom(4) man page to the xserver-xorg-input-wacom package.
    Closes: #440164
  * Include the new text and translations courtesy of the Smith Review.
    With a big thanks to everyone who contributed to that!
    Closes: #443956, #444561, #444672, #444762, #445024, #445519, #445796
    Closes: #446135, #446402, #446440, #446576, #446717
  * Tidy the debian/copyright file.  Closes: #451647
  * Add Provides: xserver-xorg-input-2 so the next X ABI transition will be
    a bit less painful for people.
  * Update the udev rules for new tablets.  Lower-case the product ids since
    udev appears to be case sensitive doing string compares for hex values.
    Nice one guys.
  * Add a build-dep for pkg-config, it appears to have infected XOrg now too.

wacom-tools (0.7.7.11-1) unstable; urgency=low

  * New upstream release.
  * Include upstream documentation like the man page says we do.
    I guess nobody ever read it before ;-)  Closes: #427689

wacom-tools (0.7.7.10-3) unstable; urgency=low

  * Reapply the patch to fix 64/32 bit cross builds, that seems to have
    been lost or misapplied too.

wacom-tools (0.7.7.10-2) unstable; urgency=low

  * Don't depend on the xorg module dir actually existing when
    --with-xmoduledir is used (again).  This is an upstream regression
    to the patch submitted for 0.7.4.1-3.  Closes: #427428

wacom-tools (0.7.7.10-1) unstable; urgency=low

  * New upstream version.  Closes: #396883, #415244, #422532
  * Update vi.po, thanks to Clytie Siddall. Closes: #427020
  * Drop the external module package, upstream seems to be syncing fairly
    regularly with the mainstream kernel team again, so this should not
    be needed by most people, and causes confusion and trouble for the rest.
    Closes: #418008, #417140, #404471, #317287
  * Lintian now bitches about reusing DH_COMPAT for the source package, so
    I guess we now need to clutter the debian/ dir with files for each use
    of the /rules.  *sigh*  This seems a bit _too_ pedantic to me.

wacom-tools (0.7.4.1-6) unstable; urgency=low

  * Debconf translation updates only.  Many thanks to Christian Perrier for
    coordinating this 'final' update for etch.
    - German. Closes: #398671
    - Galician. Closes: #407897
    - Portuguese. Closes: #408334
    - Italian. Closes: #409832
    - Japanese. Closes: #411503
    - Russian. Closes: #411748

wacom-tools (0.7.4.1-5) unstable; urgency=high

  * Urgency high because only one line of code has changed and it
    fixes a FTBFS with xorg7.1 -- broken or not.

  * Backported change from upstream cvs to remove unneccessary #include
    (for any version of xorg/xfree), that breaks builds with xorg7.1.
    cf. #388776

  * Updated fr.po, thanks to Jean-Luc Coulon and debian-l10n-french.
    Closes: #367224
  * Updated cs.po, thanks to Miroslav Kure.
    Closes: #384761
  * Added nl.po, thanks to Vincent Zweije and debian-l10n-dutch.
    Closes: #388312
  * Added sv.po, thanks to Daniel Nylander.
    Closes: #389022

wacom-tools (0.7.4.1-4) unstable; urgency=high

  * Make check_driver executable, even after it's been reconstituted
    from a diff.gz.  Closes: #384873

wacom-tools (0.7.4.1-3) unstable; urgency=low

  * Replace the quick fix from -2 with some better autodetection,
    and an option to explicitly supply the xorg module dir, which
    we can't check without build-depending on X runtime packages.

wacom-tools (0.7.4.1-2) unstable; urgency=low

  * Quick and dirty hack to workaround the failing 'dlloader' detection.

wacom-tools (0.7.4.1-1) unstable; urgency=low

  * New linuxwacom release.  Better support for PenPartner, DTF-521
    and xorg7.  Kernel 2.6 < 2.6.8 no longer supported.
  * Remove patches incorporated upstream.
  * Specify xorg-sdk and xlib locations explicitly still to avoid
    linuxwacom trying to install to lib64 if a 64bit kernel is found.
    It can be worked around for 64 bit builds, but totally breaks
    building in a ia32 chroot on such a machine if we don't do this.
  * Disable building the kernel module with the support libs
    (or at least, try to).
  * Switch to DH_COMPAT level 5.
  * Fix the product id for DTF-720.

wacom-tools (0.7.3.1-5) unstable; urgency=low

  * Move the check_driver RUN script to /lib/udev, and shave a few cycles
    from each time it is called.  Thanks to MD for checking it over.

wacom-tools (0.7.3.1-4) unstable; urgency=low

  * Update the wacom-kernel-modules package for the change in kernel
    package names.  Reported as a followup to #317288, but this does
    not solve the original issue of upgrading a kernel without a change
    in the kernel version.

wacom-tools (0.7.3.1-3) unstable; urgency=low

  * Remove the old udev rules in the postinst if they are unmodified.
    Bark at the user to remove them if they have been changed locally.
    Being conffiles, they are not removed on upgrade, even if they
    are no longer provided by the package.  But newer udev barfs on
    them, so we have to do something to get them out of the picture.

wacom-tools (0.7.3.1-2) unstable; urgency=low

  * May Day, May Day.
  * Add missing build-dep for libxi-dev.  Closes: #365538

wacom-tools (0.7.3.1-1) unstable; urgency=low

  * New upstream source.
  * The previous device snatching code will not work with
    kernel 2.6.13+, time to see what 2.6.16 has to offer
    in its place.  Closes: #350663
  * Build the wacom_drv module for xorg7, it is no longer
    supplied as part of the xorg source package.
  * Fix udev rules, again, it may still be a moving target,
    but let's hope its getting a little tired of ducking
    and weaving too.  We now provide a convenience link to
    /dev/input/wacom for users of a single tablet, and named
    links for the convenience of users with multiple tablets
    of different types.  Users with multiple tablets of the
    same type will need to bind them to the /dev/input/by-path
    nodes that correspond to each tablet.
    Closes: #324391, #358057
  * Re-implemented device rebinding from userspace, using a
    udev RUN rule and a small script to check and rebind
    if required.

wacom-tools (0.6.6-9) unstable; urgency=low

  * Added cs.po, thanks to Miroslav Kure.  Closes: #314986
  * Added jp.po, thanks to TANAKA Atushi.  Closes: #322411
  * Fixed typo in debconf template (closes: #324086), and
    added vi.po, thanks to Clytie Siddall. Closes: #324087
  * Only set KSRC to a simple default if it is not already
    set.  (cf. #315130 and #341823)
  * Rip out obsolete FLAVOUR support in line with similar
    changes to kernel-package.
  * Remove unused dh_* boilerplate.

wacom-tools (0.6.6-8) unstable; urgency=low

  * The promised new upstream is still in limbo, so in the
    meantime, s/kdist_config/kdist_configure/
    Closes: #296168, #314739
  * Look for the docs in the correct source location when
    installing them to the binary package.  Closes: #300579
  * And don't pretend they are html.  That is just far too
    surprising for popular taste.

wacom-tools (0.6.6-7) unstable; urgency=low

  * Restore build-dep on libx11-dev, despite reports to the
    contrary libxt-dev alone is evidently not sufficient.
    Closes: #294960

wacom-tools (0.6.6-6) unstable; urgency=low

  * Punt device snatching out to userspace via sysfs, it's the only
    way to be sure at present.  This is an(other) experimental
    implementation before the core kernel api is decided and only
    available for kernel 2.6.10 and later at this stage.
  * Add a udev rule to create /dev/input/wacom* for each
    wacom tablet device plugged in to the system.  Its a conffile
    so you can hard code your own device id's there if you want
    constant names that don't depend on the number of wacom devices
    you have and the order you plug them in.
  * Add a hotplug script to poke the module device snatching code.
  * Typo fix in 2.6.7/wacom.c Closes: #294642 thanks.
  * Patch missing functions into 2.6.8/wacom.c, I have a report
    that this works for people who really need it.  Closes: #287941
  * Add debhelper build-dep to the module package.  Closes: #290721
  * Add libx11 build-dep too until this is fixed properly upstream,
    and a dep on build-essential Closes: #288238 thanks.
  * Does not close #286111, nor can I reproduce it still.

wacom-tools (0.6.6-5) unstable; urgency=low

  * First crack at the device snatching patch.

wacom-tools (0.6.6-4) unstable; urgency=low

  * Removed evdev patch since what it attempts to do is
    already handled in the kernel for cases where it might
    reliably work.

    Removed usbhid patch since we can get in before it
    without needing to manually maintain a list of 'quirks'.

    Removed mousedev and usbmouse patches, since the former
    is now built into 2.6 kernels anyway and cannot easily
    be replaced on the fly, and since this is simply the wrong
    approach to fixing the problem of dynamic device naming
    for generic devices IMO, it just hides it for some people
    until they buy another device.

    This and tested support for kernel 2.6, Closes: #281230
    and more...

  * Explicitly point configure at the kernel source.  Closes: #285206

  * Update the other libtool goop as well to fix FTBFS
    on mips and mipsel.  Closes: #285213

  * (ab)use a shared 'confdir' (and worse) to restore something like
    the functionality needed by wacom.modutils for wacom.modprobe
    until we can fix the kernel.  Don't try this at home kids, it is
    surely not best practice in any of the domains it kludges through.
    Though its as legal as falling asleep sober at the wheel ...

wacom-tools (0.6.6-3) unstable; urgency=low

  * Updated to build with 2.6.10-rc2.

wacom-tools (0.6.6-2) unstable; urgency=low

  * Updated patch for kernel 2.4.28

wacom-tools (0.6.6-1) unstable; urgency=low

  * New upstream release incorporating submitted fixes,
    thanks Ping!
  * Add missing build depends, Closes: #281451
    thanks Andreas Jochens.
  * Included fr.po debconf template translation, Closes: #282768
    thanks Jean-Luc Coulon (f5ibh) and the debian-l10n-french ml.
  * Use DESTDIR instead of (ab)using prefix as it is supported here.
    Closes: #283037

wacom-tools (0.6.5-2) unstable; urgency=low

  * This package builds arch any utils too, add suitable build depends.
    Closes: #281126  Thanks lamont.

wacom-tools (0.6.5-1) unstable; urgency=low

  * New linuxwacom beta release.
  * Improves support for Intuos3 and more recent 2.6 branch kernels.
    (but still only tested with 2.4.27, see below)

wacom-tools (0.6.4-1) unstable; urgency=low

  * Initial trivial packaging.  Note this has only been tested with 2.4.27.
  * Provides the basics from the linuxwacom project -- test and config tools,
    and kernel modules in a convenient form for users of kernel packages.
    It does not provide an updated X11 module, hopefully any important parts
    of that will be ultimately be included by the X maintainers once I look
    at what they might accept.
  * Updated config.{guess,sub}.
  * Modify the version detection to handle a non-numeric suffix
    from --append_to_version or flavour.
  * Closes: #279555

 -- Timo Aaltonen <email address hidden>   Mon, 15 Dec 2008 12:12:34 +0200

Upload details

Uploaded by:
Timo Aaltonen
Uploaded to:
Jaunty
Original maintainer:
Ubuntu X-SWAT
Architectures:
any
Section:
utils
Urgency:
Very Urgent

See full publishing history Publishing

Series Pocket Published Component Section

Downloads

File Size SHA-256 Checksum
wacom-tools_0.8.1.6.orig.tar.gz 844.6 KiB 8c2282385c57451b55b2166d02ef504b642410d690e5eb46132b28731287fd65
wacom-tools_0.8.1.6-1ubuntu1.diff.gz 72.0 KiB b606a9a9b378b2f16ad37604cc1566967fe30045f764452454d66f6dc228e7c5
wacom-tools_0.8.1.6-1ubuntu1.dsc 1.2 KiB 850eff5d1d5160de7a2b5a4097a3fd1dfac434d5386d1cbc443d50d715a307d9

View changes file

Binary packages built by this source

wacom-tools: No summary available for wacom-tools in ubuntu jaunty.

No description available for wacom-tools in ubuntu jaunty.

xserver-xorg-input-wacom: No summary available for xserver-xorg-input-wacom in ubuntu jaunty.

No description available for xserver-xorg-input-wacom in ubuntu jaunty.