Ubuntu
webkit2gtk package

webkit2gtk 2.35.90-1ubuntu1 source package in Ubuntu

Changelog

webkit2gtk (2.35.90-1ubuntu1) jammy; urgency=medium

  * debian/rules:
    + Reduce the number of parallel build jobs on Ubuntu's arm64.

webkit2gtk (2.35.90-1) experimental; urgency=medium

  * New upstream development release.
  * Refresh all patches.
  * debian/source/lintian-overrides:
    + Update source-is-missing overrides.
  * debian/rules:
    + USE_SYSTEMD was renamed to ENABLE_JOURNALD_LOG.
  * debian/control:
    + Remove all Conflicts: lines, they are obsolete.
    + Make libjavascriptcoregtk-4.0-dev depend on libglib2.0-dev.
    + Simplify descriptions and remove references to the WebKit2 API
      layer.
  * Build the 4.1 API version of the packages. These use libsoup 3 instead
    of libsoup 2 but are otherwise identical to the 4.0 API packages.
    + debian/control:
      - Add build dependency on libsoup-3.0-dev and libsysprof-4-dev (the
        latter should be pulled by libsoup).
      - Add entries for the new packages. The 4.1 versions of the
        WebDriver, JSC command-line interpreter and documentation are
        currently not being generated.
    + debian/rules:
      - Add commands to build both sets of packages.
    + debian/libwebkit2gtk-4.0-37.install:
      - Update path of locale files to select only the exact API version.
    + debian/not-installed:
      - Don't install the 4.1 build of the JSC command-line interpreter.

 -- Jeremy Bicha <email address hidden>  Tue, 08 Mar 2022 08:16:40 -0500

Upload details

Uploaded by:
Jeremy Bícha
Uploaded to:
Jammy
Original maintainer:
Ubuntu Developers
Architectures:
any all
Section:
misc
Urgency:
Medium Urgency

See full publishing history Publishing

Series Pocket Published Component Section

Downloads

File Size SHA-256 Checksum
webkit2gtk_2.35.90.orig.tar.xz 27.2 MiB caca324d4fd7f8bb8d8aa78885c7a999a4080c4f181f98ca68a076f86ef4e61e
webkit2gtk_2.35.90-1ubuntu1.debian.tar.xz 73.6 KiB b098a4d2f2936a44f6703dcf31e0fcf09c5cd6d86d25263a880f00c6df25d1ff
webkit2gtk_2.35.90-1ubuntu1.dsc 4.5 KiB afa2a4a970a1f8b1c9154bd3e7a680d0eae094f73058ab47ddeeabb9b2b369bb

View changes file

Binary packages built by this source

gir1.2-javascriptcoregtk-4.0: JavaScript engine library from WebKitGTK - GObject introspection data

 JavaScriptCore is the JavaScript engine used in WebKit. It consists
 of the following building blocks: lexer, parser, start-up interpreter
 (LLInt), baseline JIT, a low-latency optimizing JIT (DFG), and a
 high-throughput optimizing JIT (FTL).
 .
 This build comes from the GTK port of WebKit (API version 4.0).
 .
 This package contains the introspection data, which can be used by
 packages using the GIRepository format to generate dynamic bindings.

gir1.2-javascriptcoregtk-4.1: JavaScript engine library from WebKitGTK - GObject introspection data

 JavaScriptCore is the JavaScript engine used in WebKit. It consists
 of the following building blocks: lexer, parser, start-up interpreter
 (LLInt), baseline JIT, a low-latency optimizing JIT (DFG), and a
 high-throughput optimizing JIT (FTL).
 .
 This build comes from the GTK port of WebKit (API version 4.1).
 .
 This package contains the introspection data, which can be used by
 packages using the GIRepository format to generate dynamic bindings.

gir1.2-webkit2-4.0: Web content engine library for GTK - GObject introspection data

 WebKit is a web content engine, derived from KHTML and KJS from KDE, and
 used primarily in Apple's Safari browser. It is made to be embedded in
 other applications, such as mail readers, or web browsers.
 .
 It is able to display content such as HTML, SVG, XML, and others. It also
 supports DOM, XMLHttpRequest, XSLT, CSS, JavaScript/ECMAScript and more.
 .
 WebKitGTK is a WebKit port designed to be used in GTK applications.
 This build provides version 4.0 of the API and uses libsoup v2 for
 the networking stack and the GTK 3 widget toolkit.
 .
 This package contains introspection data, which can be used by
 packages using the GIRepository format to generate dynamic bindings.

gir1.2-webkit2-4.1: Web content engine library for GTK - GObject introspection data

 WebKit is a web content engine, derived from KHTML and KJS from KDE, and
 used primarily in Apple's Safari browser. It is made to be embedded in
 other applications, such as mail readers, or web browsers.
 .
 It is able to display content such as HTML, SVG, XML, and others. It also
 supports DOM, XMLHttpRequest, XSLT, CSS, JavaScript/ECMAScript and more.
 .
 WebKitGTK is a WebKit port designed to be used in GTK applications.
 This build provides version 4.1 of the API and uses libsoup v3 for
 the networking stack and the GTK 3 widget toolkit.
 .
 This package contains introspection data, which can be used by
 packages using the GIRepository format to generate dynamic bindings.

libjavascriptcoregtk-4.0-18: JavaScript engine library from WebKitGTK

 JavaScriptCore is the JavaScript engine used in WebKit. It consists
 of the following building blocks: lexer, parser, start-up interpreter
 (LLInt), baseline JIT, a low-latency optimizing JIT (DFG), and a
 high-throughput optimizing JIT (FTL).
 .
 This build comes from the GTK port of WebKit (API version 4.0).
 .
 This package contains the shared libraries.

libjavascriptcoregtk-4.0-18-dbgsym: debug symbols for libjavascriptcoregtk-4.0-18
libjavascriptcoregtk-4.0-bin: JavaScript engine library from WebKitGTK - command-line interpreter

 JavaScriptCore is the JavaScript engine used in WebKit. It consists
 of the following building blocks: lexer, parser, start-up interpreter
 (LLInt), baseline JIT, a low-latency optimizing JIT (DFG), and a
 high-throughput optimizing JIT (FTL).
 .
 This build comes from the GTK port of WebKit (API version 4.0).
 .
 This package provides jsc, a command-line JavaScript interpreter.

libjavascriptcoregtk-4.0-bin-dbgsym: debug symbols for libjavascriptcoregtk-4.0-bin
libjavascriptcoregtk-4.0-dev: JavaScript engine library from WebKitGTK - development files

 JavaScriptCore is the JavaScript engine used in WebKit. It consists
 of the following building blocks: lexer, parser, start-up interpreter
 (LLInt), baseline JIT, a low-latency optimizing JIT (DFG), and a
 high-throughput optimizing JIT (FTL).
 .
 This build comes from the GTK port of WebKit (API version 4.0).
 .
 This package contains the development files.

libjavascriptcoregtk-4.1-0: JavaScript engine library from WebKitGTK

 JavaScriptCore is the JavaScript engine used in WebKit. It consists
 of the following building blocks: lexer, parser, start-up interpreter
 (LLInt), baseline JIT, a low-latency optimizing JIT (DFG), and a
 high-throughput optimizing JIT (FTL).
 .
 This build comes from the GTK port of WebKit (API version 4.1).
 .
 This package contains the shared libraries.

libjavascriptcoregtk-4.1-0-dbgsym: debug symbols for libjavascriptcoregtk-4.1-0
libjavascriptcoregtk-4.1-dev: JavaScript engine library from WebKitGTK - development files

 JavaScriptCore is the JavaScript engine used in WebKit. It consists
 of the following building blocks: lexer, parser, start-up interpreter
 (LLInt), baseline JIT, a low-latency optimizing JIT (DFG), and a
 high-throughput optimizing JIT (FTL).
 .
 This build comes from the GTK port of WebKit (API version 4.1).
 .
 This package contains the development files.

libwebkit2gtk-4.0-37: Web content engine library for GTK

 WebKit is a web content engine, derived from KHTML and KJS from KDE, and
 used primarily in Apple's Safari browser. It is made to be embedded in
 other applications, such as mail readers, or web browsers.
 .
 It is able to display content such as HTML, SVG, XML, and others. It also
 supports DOM, XMLHttpRequest, XSLT, CSS, JavaScript/ECMAScript and more.
 .
 WebKitGTK is a WebKit port designed to be used in GTK applications.
 This build provides version 4.0 of the API and uses libsoup v2 for
 the networking stack and the GTK 3 widget toolkit.
 .
 This package contains the shared libraries.

libwebkit2gtk-4.0-37-dbgsym: debug symbols for libwebkit2gtk-4.0-37
libwebkit2gtk-4.0-dev: Web content engine library for GTK - development files

 WebKit is a web content engine, derived from KHTML and KJS from KDE, and
 used primarily in Apple's Safari browser. It is made to be embedded in
 other applications, such as mail readers, or web browsers.
 .
 It is able to display content such as HTML, SVG, XML, and others. It also
 supports DOM, XMLHttpRequest, XSLT, CSS, JavaScript/ECMAScript and more.
 .
 WebKitGTK is a WebKit port designed to be used in GTK applications.
 This build provides version 4.0 of the API and uses libsoup v2 for
 the networking stack and the GTK 3 widget toolkit.
 .
 This package contains the development files.

libwebkit2gtk-4.0-doc: Web content engine library for GTK - documentation

 WebKit is a web content engine, derived from KHTML and KJS from KDE, and
 used primarily in Apple's Safari browser. It is made to be embedded in
 other applications, such as mail readers, or web browsers.
 .
 It is able to display content such as HTML, SVG, XML, and others. It also
 supports DOM, XMLHttpRequest, XSLT, CSS, JavaScript/ECMAScript and more.
 .
 WebKitGTK is a WebKit port designed to be used in GTK applications.
 .
 This package contains the documentation and is valid for versions 4.0,
 4.1 and 6.0 of the API.

libwebkit2gtk-4.1-0: Web content engine library for GTK

 WebKit is a web content engine, derived from KHTML and KJS from KDE, and
 used primarily in Apple's Safari browser. It is made to be embedded in
 other applications, such as mail readers, or web browsers.
 .
 It is able to display content such as HTML, SVG, XML, and others. It also
 supports DOM, XMLHttpRequest, XSLT, CSS, JavaScript/ECMAScript and more.
 .
 WebKitGTK is a WebKit port designed to be used in GTK applications.
 This build provides version 4.1 of the API and uses libsoup v3 for
 the networking stack and the GTK 3 widget toolkit.
 .
 This package contains the shared libraries.

libwebkit2gtk-4.1-0-dbgsym: debug symbols for libwebkit2gtk-4.1-0
libwebkit2gtk-4.1-dev: Web content engine library for GTK - development files

 WebKit is a web content engine, derived from KHTML and KJS from KDE, and
 used primarily in Apple's Safari browser. It is made to be embedded in
 other applications, such as mail readers, or web browsers.
 .
 It is able to display content such as HTML, SVG, XML, and others. It also
 supports DOM, XMLHttpRequest, XSLT, CSS, JavaScript/ECMAScript and more.
 .
 WebKitGTK is a WebKit port designed to be used in GTK applications.
 This build provides version 4.1 of the API and uses libsoup v3 for
 the networking stack and the GTK 3 widget toolkit.
 .
 This package contains the development files.

webkit2gtk-driver: WebKitGTK WebDriver support

 WebKit is a web content engine, derived from KHTML and KJS from KDE, and
 used primarily in Apple's Safari browser. It is made to be embedded in
 other applications, such as mail readers, or web browsers.
 .
 It is able to display content such as HTML, SVG, XML, and others. It also
 supports DOM, XMLHttpRequest, XSLT, CSS, JavaScript/ECMAScript and more.
 .
 WebKitGTK is a WebKit port designed to be used in GTK applications.
 .
 This package provides the WebDriver service implementation for
 WebKitGTK.

webkit2gtk-driver-dbgsym: debug symbols for webkit2gtk-driver