mdadm (2.5.5-1ubuntu1) feisty; urgency=low
* Merge from debian unstable.
mdadm (2.5.5-1) unstable; urgency=low
* New upstream release:
- fixes the build problems on several architectures (closes: #393314) by
including the contents of linux/blkpg.h literally, not via #include.
- optimises bitmap file use on 64bit systems.
- does not error out anymore when trying to assemble an already assembled
array without a corresponding /dev device node.
- does not report an error if --assemble --scan only finds already running
arrays.
- fixes several bugs related to RAID10 and the new offset layout.
- improves error message when a wrong '--update' option is given.
* Added FAQ entries about partitionable arrays.
* chroot detection now also works for 2.6.18 and beyond (c.f. kernel commit
778c1144771f0064b6f51bee865cceb0d996f2f9).
* Now recommends module-init-tools.
* Hides ugly errors during configuration in the absense of module-init-tools
or initramfs-tools.
* Send udev events for arrays assembled by the mdadm-raid init.d script.
This does not close #394193 but it's a good addition anyway. I am not
sending these events from the initramfs as well because it would be
non-trivial to ensure that an event doesn't get sent twice for a given
array.
Anyway, this is all a hack until the kernel sends online/offline events to
udev. See #394193.
* Added more RAID10 information to the FAQ.
* Added filters to logcheck for regular events, even by the md driver; also
promoted messages about non-fresh components to security events.
* Hide informational messages unless VERBOSE is set to a true value in
/etc/default/mdadm.
mdadm (2.5.4-1) unstable; urgency=low
* New upstream release:
- --examine now reports chunk size also for RAID6 and RAID10
- fix endianness issues with v1 superblocks (closes: #385726) and bitmap
metadata.
- improved message when mdadm detects similar superblocks
(closes: #385951).
- documents that the automatic update of the super-minor field in the
superblock when using a 2.6 kernel only applies to RAID levels 1 and
higher. RAID0 array superblocks must be manually updated
(closes: #386315, #388172).
- removes partition table from any whole device added to an array.
- allow --auto=yes to specify a number; if mdadm determines from the
device name that you want a partitionable array, this number determines
the number of sub-device nodes to create.
* Removed patch previously used to fix #385951 because it's not adequate.
See the bug log for reasons.
mdadm (2.5.3.git200608202239-8) unstable; urgency=low
* This revision is dedicated to Peter Samuelson for his RAID10 expertise^W
educated guess^W^W pure luck. (:
* Now writes minimal mdadm.conf file even if the MD subsystem has not been
loaded and the scan for arrays thus failed.
* Now tries to ensure that the configuration file used for the initramfs
actually defines arrays.
* Now preserves MAILADDR from an existing mdadm.conf when generating a new
one.
* Documentation updates.
* Updated debconf translations:
- German by Mario Joußen.
- Vietnamese by Clytie Siddall (closes: #390311).
- Dutch by Frans Pop (closes: #390955).
- French by Jean-Luc Coulon (closes: #391215).
mdadm (2.5.3.git200608202239-7) unstable; urgency=medium
* Fixed a serious bug in the debconf script which would cause the
configuration to exit prematurely in cases when the root could not be
determined. Since this is RC, the urgency is set to medium.
* Updated the documentation a bit.
* Updated debconf translations:
- Swedish by Daniel Nylander (closes: #389040).
- Czech by Miroslav Kure (closes: #389083).
- Russian by Yuri Kozlov (closes: #389086).
- Brazilian Portuguese by Felipe Augusto.
mdadm (2.5.3.git200608202239-6) unstable; urgency=high
* Bumping urgency to high because previous version has been in unstable for
three days and this one really only fixes a stupid segfault:
* Reworked the parsing of /proc/partitions and spotted a mean segfault
(closes: #388355).
mdadm (2.5.3.git200608202239-5) unstable; urgency=medium
* Keeping medium urgency due to RC bug.
* Modified the patch responsible for pruning parent devices so that
superblocks at the end of a disk do not get interpreted twice. It now
makes less assumptions about the exact output of /proc/partitions and
should thus be more robust (now closes: #385951).
* Added code that defers mdadm preconfiguration when the debconf backend is
too old (and does not provide debconf-escape). Now configuration is
postponed until the postinst is run in this case.
mdadm (2.5.3.git200608202239-4) unstable; urgency=medium
* Correct error related to an unbound variable in postinst.
* Keeping medium urgency.
mdadm (2.5.3.git200608202239-3) unstable; urgency=medium
* Urgency medium because of RC bugs.
* Add versioned dependency to debconf (closes: #385994); temporary fix until
we find a proper fix for #386439.
* Add patch by Steinar H. Gunderson to ensure mdadm does not interpret
a superblock as belonging to a device when it's actually part of
a partition on that device (closes: #385951).
* Do not override the superblock default version in mdadm.conf to prevent
creation of superblocks that the kernel can't handle (closes: #384614).
* Added a note to alert people that the warning about arrays not listed in
the configuration file is only relevant if the arrays are needed to be
brought up by mdadm from initramfs during boot (closes: #385017).
* Added bootloader/cmdline info to bugscript so that future bug reports via
bug/reportbug include information on how the system is booted with respect
to RAID (the root partition).
* If mdadm is being configured in a chroot, it now defaults to starting all
arrays from the initial ramdisk, rather than trying to figure out the root
MD array (we're using /proc information, so it would be the one of the
host, not the one of the chroot) (closes: #386468).
* Added LSB headers to init scripts.
* Reworked the documentation with respect to the use of "MD" and "RAID", and
added a FAQ entry on the meaning of "MD". Thanks to Frans Pop for his
help!
* Updated debconf translations:
- Czech by Miroslav Kure (closes: #384754).
- French by Florentin Duneau (closes: #385690).
- Russian by Yuri Kozlov (closes: #387017).
mdadm (2.5.3.git200608202239-2) unstable; urgency=low
* Allow ARRAY lines in configuration file to break across lines
(closes: #384222).
* Improved initramfs hook; now does not rely on initramfs to provide RAID
assembly:
- if a checked mdadm.conf file is present, use that.
- if an unchecked mdadm.conf is present, create a temporary one
- if that fails, use the unchecked one iff it contains at least one
ARRAY statement. Otherwise rely on auto-generation from the initramfs
during the book (and hope for the best).
- if no mdadm.conf is found, create one on the fly
- if that fails, hope that the auto-generation will work during boot
* Improved the messages printed by the initramfs script.
* Do not store the debconf answer for whether arrays not listed in the
configuration file should be used.
* Now asks again for the devices to start (preseeded with 'all') if the user
does not want to proceed with devices not listed in the configuration
file.
mdadm (2.5.3.git200608202239-1) unstable; urgency=low
* Tracking upstream git releases.
- now the --run switch behaves as stated in the manpage. This properly
fixes #287415
- new version-1 partitionable arrays are now named X instead of _dX (e.g.
0 instead of _d0) for device names like md_dX. I actually think this is
a bug and hope upstream will use dX (e.g. d0) instead in a future
version.
- we specify --symlink=no and thus disable the new feature to create
/dev/mdX symlinks to /dev/md/X devices until the entire device node mess
is cleared up. No need to introduce yet another complicating factor at
this stage.
* Instead of trying to do a whole lot of magic with respect to detecting
RAID devices to start, mdadm from now on requires a valid mdadm.conf file
to be installed. It still tries to do what it can, but there are no
heuristics anymore. See /usr/share/doc/mdadm/README.upgrading-2.5.3 .
* Removed the zero-superblock warning because we require the user to sign
off the configuration file anyway.
* This also enables us to use mdadm.conf from the initial ramdisk and thus
closes: #381303.
* In case the user chooses to assemble all arrays from the initial ramdisk,
use the new homehost feature of mdadm (closes: #381057). This will start
only those arrays belonging to the local system, unless it is the first
run on a system, in which case it will start all arrays and mark them as
belonging to the local system.
* Improved the debconf control script: integrated error messages into the
frontends, and made it a bit smarter. Error messages can now be
translated, and the script checks whether the user's choice is listed in
the configuration file and only proceeds if it is, or the user chooses to
ignore that it is not.
* mkconf can now take a generate/force-generate parameter to write directly
to /etc/mdadm/mdadm.conf. A second parameter specifies an alternate
filename.
* mkconf now outputs comments for the settings it suggests.
* Removed all udev-related stuff. We must coexist with udev because there
are setups that assemble arrays without mdadm, so the device nodes must be
created by udev, if that is used.
(closes: #382263, #382450, #383688, #383891, #383806, #382480)
Staying at low urgency since these (RC) bugs only exist in unstable.
* Now installs MD modules and mdadm/mdrun into initial ramdisk regardless of
whether the hook script thinks there are devices to start. This was done
to enable recovery from the initramfs shell.
* Now uses 'MD' instead of 'RAID' consistently in all messages.
* Now rebuilds initramfs for all installed kernels.
* Now breaks the endless config loop only when the user does not see the
question (see #381284, #381007).
* Don't fail mdadm-raid when /dev is on a read-only filesystem
(closes: #382876).
* Updated debconf translations:
- French by Florentin Duneau (closes: #382389).
mdadm (2.5.2-10) unstable; urgency=low
* Applied patch by upstream to fix the logic of the --run switch (see
#287415). Thus also reverted the mdadm-raid hack used to fix the bug in
the 2.5.2-9 upload.
* Recognise devfs-style device nodes by fixing a regression bug in the root
RAID autodetection code (closes: #381007), which was introduced as part of
the fix for #380596 in the 2.5.2-9 upload. The bug is RC, but it only
applies to unstable right now, so I am not pumping up the urgency.
The autodetection code now doesn't care about the actual name of the array
device, but instead only insists that it exists, is a block device, and
recognised as an array by mdadm (mdadm --detail).
* Added safety net to prevent endless loops in RAID autodetection. Now just
falls back to starting all arrays from the initramfs if it fails to
determine an acceptable array for the / filesystem in three tries
(closes: #381284, also see #381007).
* Added udev rules file to prevent udev from ever creating md device nodes,
which can get in the way of mdadm (also see next item).
* Added a workaround to the initramfs hook to deal with the problem with
/dev/md/X device nodes when /dev/mdX is also present and version-0
superblocks are in use (closes: #381181).
* checkarray: correctly recognise when the kernel is too old for parity
checks, or when there are no redundant arrays present (closes: #380746).
* checkarray: now supports -s|--status switch to query parity check status
for given devices.
* checkarray: now supports -x|--cancel switch to cancel running checks.
* mkconf: now also outputs 'MAILADDR root' and 'HOMEHOST <system>'.
* Added README.checkarray with some information about the check process.
* Added /usr/share/doc/mdadm/FAQ to answer some FAQs.
mdadm (2.5.2-9) unstable; urgency=low
* Added logcheck rules for kernel messages generated by checkarray, using
logcheck server level.
* Added handling of partitionable arrays to root RAID autodetection script
(closes: #380596).
* Forcing RAID assembly to run the arrays, working around an upstream bug
until that's fixed (closes: #287415).
* Updated documentation in README.initramfs-transition to include
information related to #380089.
* Updated debconf translations:
- Vietnamese by Clytie Syddall, thanks!
mdadm (2.5.2-8) unstable; urgency=low
* Re-added rootraiddoc.97.html which was mysteriously lost (closes: #378678).
* Catching modprobe error in case of absence of the kernel modules, or
a non-modular kernel. Thanks to Holger Levsen.
* Copy raid456 kernel module into initramfs, if present (closes: #380152).
* checkarray: check for presence of active RAID arrays and give an
appropriate error if there are none present (closes: #379019).
* checkarray: skip sync for non-redundant devices (closes: #379352, #380424).
* Fixing cron registration for checkarray. crontab(5) is really stupid and
makes me think that they simply documented a bug instead of fixing it, so
now I have to hack around it. See the cron.d file (closes: #380425).
* Removed the code writing auto-detected devices to /var, which was silly
since /var isn't necessarily mounted yet by the time mdadm-raid is called.
Thanks to Maurizio Avogadro for pointing this out.
* Add reference to BAARF to README.Debian and included the RAID5 vs RAID10
article from the BAARF website.
* Updated debconf translations:
- Japanese by Hideki Yamane, thanks!
- French by Florentin Duneau, thanks! (closes: #379511)
mdadm (2.5.2-7) unstable; urgency=low
* Release to unstable.
mdadm (2.5.2-6) experimental; urgency=low
* Adding mdrun to generated udeb. I will only remove mdrun after etch.
* Updated debconf translations:
- Dutch, thanks to Frans "Franzerl" Pop! (closes: #377412)
- French, thanks to Florentin Duneau! (closes: #377968)
mdadm (2.5.2-5) UNRELEASED; urgency=low
* Remove the check for the lvm prereq in the initramfs hook, as #369617 is
now fixed. Thus conflicts against initramfs-tools (<< 0.65).
* Updated debconf translations:
- German, thanks to Mario Joußen!
* Added short note about maintenance in SVN to README.Debian.
mdadm (2.5.2-4) UNRELEASED; urgency=low
* The "it takes two to swing" release.
* Now does not stop arrays on upgrade or remove. Thanks (and sorry) to
Christian Pernegger (and hopefully no others).
* Fixed small problem in debconf configuration script related to unbound
MAIL_TO variable. Thanks to Christian Pernegger.
mdadm (2.5.2-3) UNRELEASED; urgency=low
* The initramfs now gets all RAID modules installed. It's a lot safer to
have them all around, the size difference is negligible, and we still only
load the needed ones at boot time.
* Added /usr/share/mdadm/checkarray, which can be used to check arrays for
parity. Also added a debconf question to let the user choose whether
cron should run these checks (closes: #377071).
* Only shut down arrays automatically when they've been automatically
started (closes: #376009).
* Make sure the user has a chance to choose the autostart feature by
elevating the debconf priority to high (see #376009). The warning about
reuse of RAID components has also been elevated to debconf priority high.
* The MAIL_TO setting from /etc/default/mdadm has been removed. Instead, use
MAILADDR in /etc/mdadm/mdadm.conf. See mdadm.conf(5). Your setting should
be automatically migrated.
* Now rewrites /etc/default/mdadm (but preserves settings) instead of trying
to patch it with changes.
* Added note to README.Debian to ensure users know that only the devices
listed in mdadm.conf will be autostarted (see #376009).
* Now includes latest md.txt from kernel documentation in
/usr/share/doc/mdadm/md.txt.gz.
* Added some more recipes to /usr/share/doc/mdadm/README.recipes.gz.
* Updated debconf translations:
- Swedish, thanks to Daniel Nylander!
- Brazilian Portuguese, thanks to Felipe Augusto van de Wiel!
- Czech, thanks to Miroslav Kure!
- Russian, thanks to Yuri Kozlov (closes: #376181).
* Further updates to the debconf templates; I hope the translators aren't
going to kill me.
mdadm (2.5.2-2) experimental; urgency=low
* The "if it weren't for Munich's wheat beer, there'd be no" release.
* Removed -fno-strict-aliasing from compiler options, after upstream fixed
the bug that led to its use (see #369779, #356153). Thanks to Elimar
Riesebieter for pointing this out (closes: #375876).
* Moved detection of RAID devices from initramfs hook to debconf control
file, and added a (low-priority) debconf question as to which devices
should be started early in the boot sequence. For the cases where we
failed to auto-detect previously (e.g. root on LVM on RAID), it's paranoid
and suggests to start them all (closes: #375879). Thanks to Alec Berryman
for spotting this.
* Fixed a typo in README.experimental, which could lead to an unbootable
system with initramfs-tools 0.64 or before. Again, thanks to Alec for
spotting this.
* Extended bug script to include --examine output for all components (at
least if called by root, which hopefully should never happen. Err,
wait...)
* Disabled deprecation warning in mdrun until the transition is complete.
* Reworded the debconf templates due to a new question, and also for
readability.
mdadm (2.5.2-1) experimental; urgency=low
* New upstream release.
* Implemented checks in the initramfs hooks and scripts for compatibility
with initramfs-tools. Now we do not need a conflict anymore because
mdadm's hooks and scripts will simply do nothing while the ones provided
by initramfs-tools are still present.
* Not using /bin/bash for mdrun, which I thought we'd need for read timeout
support (for the deprecation warning). Since the -n and -t flags to the
read shell builtin are non-POSIX, I dropped them, they were merely
cosmetic anyway.
mdadm (2.5.1-2) experimental; urgency=low
* Updating dependency on initramfs-tools, which has not yet adopted to mdadm
taking over the hooks.
mdadm (2.5.1-1) experimental; urgency=low
* New upstream release:
- Really fixes return status of examine (closes: #367901).
- Fixes a memory leak in monitor mode (closes: #372618).
- Fixes compiler warnings and errors (closes: #373802, #356153, #369779).
- Fix byte swapping issues (closes: #369765).
- Now lists devices it stops (closes: #369850). This also leads to
beautification of the init.d script's stop action.
* Fixed RAID init script to not complain about missing logger command.
mdadm (2.5-4) experimental; urgency=low
* The "would you like fries with your parasite?" release.
* Now does not require RAID support from the kernel just for package
installation; that was silly of me, sorry (closes: Bug#370115).
* Added version to Replaces: initramfs-tools dependency.
* Further init.d script improvements.
* Recommends mail-transport-agent, or the monitor daemon won't be able to
send anything.
* Ignores failures from modprobe in postinst when RAID modules are not
available (closes: #370582).
mdadm (2.5-3) experimental; urgency=low
* Added /usr/share/doc/mdadm/README.recipes with some common usage examples.
* Vastly improved the mdadm-raid init.d script output, and removed bashisms.
mdadm (2.5-2) experimental; urgency=low
* The "on her majesty's secret service" release.
* Enabled -DDEBIAN during build, which will take care of default permissions
on devices created by mdadm. Together with the CREATE configuration
directive in 2.5, this now certainly closes: Bug#310241.
* Added a patch (incorporating lib/mm/xlate.h from lvm2) to prevent direct
access to kernel headers from userspace (closes: Bug#369765).
* Disabled strict aliasing compiler checks until we find a better
implementation for linked lists in C (closes: Bug#369779, Bug#356153).
* Actually decreased the size of the udeb mdadm binary with -Os
-fomit-frame-pointer (as suggested by Joey Hess) (closes: Bug#314370)
* Added Replaces: initramfs-tools to communicate that we're not conflicting
but replacing instead (see Bug#367567)
* Updated conflict with initramfs-tools to (<< 0.63) per suggestion by the
maintainers.
mdadm (2.5-1) experimental; urgency=low
* The "show me the way to the next whiskey bar" release.
* See /usr/share/doc/mdadm/README.experimental or
http://madduck.net/~madduck/scratch/README.experimental
* New upstream release:
- mails include /proc/mdstat output (closes: Bug#355882)
- allows specification of device permissions in config (closes: Bug#310241)
* /sbin/mdrun has been deprecated and replaced by calls to /sbin/mdadm;
a proper deprecation warning is in place (see NEWS).
* Moved initramfs hook and script into the package, and switched it to mdadm
(from mdadm. Thanks to Stephen Frost for his help (closes: Bug#354144).
This should make sure that the right minor numbers are chosen during boot
(mainly because mdadm takes care of it all) (closes: Bug#361408).
* Removing mdrun from the udeb (d-i patch submitted to debian-boot mailing
list)
* Upstream links against openssl for SHA1 support (homehost feature), which
is a problem. An internal SHA1 implementation is provided, however, so
I just link against that.
* Switched init.d scripts to use LSB-compliant output.
* Enhanced init.d script output.
-- Fabio M. Di Nitto <email address hidden> Wed, 15 Nov 2006 12:35:19 -0800
